Upcoming Classes Upcoming Class Cycles
| |
|
|
|
|
|
Economic Stimulus Special |
|
|
| |
|
|
|
|
|
|
Pricing |
|
|
|
| |
starts |
Mon. |
Apr 05 |
24 |
hours |
$ 375.00 |
|
$ 315.00 |
|
AutoCAD 1-2-3-5 |
starts |
Apr 05 |
| |
starts |
Tue. |
Apr 06 |
16 |
hours |
$ 320.00 |
|
$ 325.00 |
|
Revit 1-2-3-4 |
starts |
Apr 06 |
| |
starts |
Mon. |
Mar 01 |
16 |
hours |
$ 295.00 |
|
$ 245.00 |
|
SketchUp 1-2 |
starts |
Apr 26 |
| |
starts |
Mon. |
Apr 05 |
24 |
hours |
$ 395.00 |
|
$ 325.00 |
|
Naviworks 1 |
starts |
Apr 05 |
|
starts |
Tue. |
May 11 |
24 |
hours |
$ 395.00 |
|
$ 325.00 |
|
3ds Max 1-2 |
starts |
Feb 09 |
|
starts |
Tue. |
Mar 16 |
24 |
hours |
$ 395.00 |
|
$ 325.00 |
|
Revit 1-2-3-4 |
starts |
Apr 06 |
Select your desired course below to learn about 2010 class schedules and pricing.
Our class cycles repeat every calendar quarter.
Economic Stimulus Special: These are trying times and we're trying to help you prepare for the Economic Recovery.
We have temporarily reduced our prices.
All
of our classes may be taken independently or as Bundled Training Packages.
Please call to schedule a class for your office or workgroup.
|
Blueprint Reading 1
Introduction to Blueprint Reading
Daytime Classes
| Blueprint Reading classes are taught as small group instruction, with no more than eight people in a session. There are two two-hour meetings. The same session is offered either in the morning or in the afternoon. The second session is taught a week later. |
| |
| Friday Daytime Classes |
| |
|
|
|
| Oct 16 + Oct 23 2009 |
Fri |
10:00am-12:00pm |
$ 80.00 |
| Oct 16 + Oct 23 2009 |
Fri |
1:00pm-3:00pm |
$ 80.00 |
| |
|
|
|
| |
|
|
|
| Evening Classes |
|
|
|
Blueprint Reading Classes are taught on Fridays, from 10:00 until noon and from 1:00 until 3:00 |
|
|
| |
Economic Stimulus |
Special |
$65.00 |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Blueprint Detailing 2
Blueprint Detailing with AutoCAD
| Blueprint Detailing classes are taught as small group instruction, with no more than eight people in a class. There are three three-hour classes where we focus on creating architectural details using AutoCAD. The same session is offered either in the morning or in the afternoon. The classes are taught on consecutive Fridays. |
| |
| Friday Daytime Classes |
| |
|
|
|
| Nov 13 + Nov 20 2009 |
Fri |
10:00am-12:00pm |
$ 80.00 |
| Nov 13 + Nov 20 2009 |
Fri |
1:00pm-3:00pm |
$ 80.00 |
| |
|
|
|
| |
|
|
|
| Evening Classes |
|
|
|
| |
|
|
|
| Blueprint Reading Classes are taught on Fridays, from 10:00 until noon and from 1:00 until 3:00 |
|
|
| |
| |
Economic Stimulus |
Special |
$65.00 |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Drafting
- Introduction
(UCSD AutoCAD 1)
| Monday/Wednesday Day
Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Jul 07 - Jul 26 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Oct 04 - Oct 20 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Jul 07 - Jul 26 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Oct 04 - Oct 20 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
|
Drafting - Intermediate
- Working Drawings
(UCSD AutoCAD 2)
| Monday/Wednesday Day Classes |
| |
| May 03 - May 19 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Aug 02 - Aug 18 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Nov 01 - Nov 17 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening Classes |
| |
| May 03 - May 19 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Aug 02 - Aug 18 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Nov 01 - Nov 17 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Drafting - Advanced - Working Drawings
(UCSD AutoCAD 3)
| Monday/Wednesday Day
Classes |
| |
|
|
|
Our AutoCAD 3 classes are taught in the evening only.
If you office is interested in a customized daytime training class, please call Robyn at 619-758-9300 Extension 6#. |
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Jun 02 - Jun 23 2010 * |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Aug 30 - Sep 20 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Nov 29 - Dec 15 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
* No class Wednesday, 09 June 2010 (AIA National Convention)
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
|
AutoCAD
Certification Review Class
AutoCAD Certification Review Class
| Monday Evening
Classes |
| |
|
|
|
| Mar 22, 2010 |
M |
5:30pm-9:30pm |
$ 150.00 |
| Jun 28, 2010 |
M |
5:30pm-9:30pm |
$ 150.00 |
| Sep 27, 2010 |
M |
5:30pm-9:30pm |
$ 150.00 |
Dec 20, 2010 |
M |
5:30pm-9:30pm |
$ 150.00 |
| |
|
|
|
This class is designed to help you prepare for the AutoCAD Certification Examination. |
Advanced - CAD Project Management
Afternoon Classes |
AutoCAD/AutoCAD LT 4 is currently under development.
If you are interested in this class, please call Robyn Adams-Young to discuss your interest. 619-758-9300 Extension 6#. |
| |
| Evening Classes |
AutoCAD/AutoCAD LT 4 is currently under development.
If you are interested in this class, please call Robyn Adams-Young to discuss your interest. 619-758-9300 Extension 6#. |
3D Modeling - Introduction
(UCSD AutoCAD 3)
| Tuesday/Thursday Day Classes |
| |
|
|
|
| Jun 01 - Jun 17 2010 |
Tu/Th |
1:00pm-5:00pm |
$ 375.00 |
| Aug 31 - Sep 16 2010 |
Tu/Th |
1:00pm-5:00pm |
$ 375.00 |
| Nov 30 - Dec 15 2010 |
Tu/Th |
1:00pm-5:00pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
Please read in the Evening Class schedule for specific information.
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Jun 01 - Jun 17 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 375.00 |
| Aug 31 - Sep 16 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 375.00 |
| Nov 30 - Dec 15 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The book is from Autodesk. The version available at Amazon do not satisfy the course requirements. The textbook is:
Learning AutoCAD 3D 2010, Volume 1 Autodesk Certification Preparation –
001B1-051000-C120A AOTC AutoCAD 3D
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
|
3D Modeling - Intermediate
Afternoon Classes |
AutoCAD/AutoCAD LT 6 is currently under development.
If you are interested in this class, please call Robyn Adams-Young to discuss your interest. 619-758-9300 Extension 6#. |
| |
| Evening Classes |
AutoCAD/AutoCAD LT 6 is currently under development.
If you are interested in this class, please call Robyn Adams-Young to discuss your interest. 619-758-9300 Extension 6#. |
Back
to Top
AutoCAD
/ AutoCAD LT 1
for Manufacturing and Mechanical Design
|
AutoCAD 1
- Introduction to Manufacturing and Mechanical Design
| Monday/Wednesday Day
Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Jul 07 - Jul 26 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Oct 04 - Oct 20 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| |
|
|
|
| Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
Please read in the Evening Class schedule for specific information.
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Jul 07 - Jul 26 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Oct 04 - Oct 20 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
| Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
|
Back
to Top
AutoCAD
/ AutoCAD LT 2
for Manufacturing and Mechanical Design |
AutoCAD 2 - Intermediate
| Monday/Wednesday Day
Classes |
| |
|
|
|
| May 03 - May 19 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Aug 02 - Aug 18 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| Nov 01 - Nov 17 2010 |
M/W |
1:00pm-5:00pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
Please read in the Evening Class schedule for specific information.
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| May 03 - May 19 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Aug 02 - Aug 18 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Nov 01 - Nov 17 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
|
Back
to Top
AutoCAD
/ AutoCAD LT 3
for Manufacturing and Mechanical Design |
AutoCAD 3 - Advanced
| Monday/Wednesday Day
Classes |
| |
|
|
|
Our AutoCAD 3 classes are taught in the evening only.
If you office is interested in a customized daytime training class, please call Robyn at 619-758-9300 Extension 6#. |
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Monday/Wednesday Evening
Classes |
| |
|
|
|
| Mar 01 - Mar 17 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Jun 02 - Jun 23 2010 * |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Aug 30 - Sep 20 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Nov 29 - Dec 15 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
* No class Wednesday, 09 June 2010 (AIA National Convention)
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This same textbook is used through the AutoCAD series of classes. It is an excellent resource for helping you prepare for AutoCAD Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning AutoCAD 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning AutoCAD 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
AutoCAD 2010
- Upgrade Training
Friday Afternoon Classes
The AutoCAD 2010 Upgrade classes are only
taught on Friday afternoons.
Please call us 619-758-9300 for specific scheduling options.
Inventor 1
Introduction
Daytime Classes
| We are currently offering Autodesk Inventor 1 only in the evening classes. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Jul 07 - Jul 26 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Oct 04 - Oct 20 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $95.95 plus shipping. This same textbook is used through the Autodesk Inventor series of classes. It is an excellent resource for helping you prepare for Autodesk Inventor Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Inventor 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Inventor 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Inventor 2
Intermediate
Daytime Classes
| We are currently offering Autodesk Inventor 2 only in the evening classes. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| May 03 - May 19 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Aug 02 - Aug 18 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| Nov 01 - Nov 17 2010 |
M/W |
5:30pm-9:30pm |
$ 375.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $95.95 plus shipping. This same textbook is used through the Autodesk Inventor series of classes. It is an excellent resource for helping you prepare for Autodesk Inventor Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Inventor 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Inventor 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$315.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Inventor 3
Advanced
Daytime Classes
| Our course is currently under development. Please check back for updated information, or give us a call at 619-758-9300, Extension 6# and speak with Robyn. |
| |
| Evening Classes |
Our course is currently under development. Please check back for updated information, or give us a call at 619-758-9300, Extension 6# and speak with Robyn. |
| |
|
|
|
| |
|
|
|
Back
to Top
Autodesk Inventor
Certification Review Class |
Autodesk Inventor Certification Review Class
| Monday Evening Classes |
| |
|
|
|
Dec 22 2009 |
M |
5:30pm-9:30pm |
$ 150.00 |
| |
|
|
|
This class is designed to help you prepare for the Autodesk Inventor Certification Examination. |
Navisworks I - Introduction to Collision Detection and Project Optimization
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Apr 05 - Apr 21 2010 |
M/W |
5:30pm-9:30pm |
$ 395.00 |
| Jul 12 - Jul 28 2010 |
M/W |
5:30pm-9:30pm |
$ 395.00 |
| Oct 04 - Oct 20 2010 |
M/W |
5:30pm-9:30pm |
$ 395.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping.
The book is from Autodesk. The version available at Amazon do not satisfy the course requirements. The textbook is:
Learning Autodesk Navisworks 2009, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
|
REVIT I - Introduction to Building
Information Modeling
| Tuesday/Thursday Daytime Classes |
| |
|
|
|
| Apr 06 - Apr 15 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| Jul 06 - Jul 15 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| Oct 05 - Oct 14 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$265.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Apr 06 - Apr 15 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| Jul 06 - Jul 15 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| Oct 05 - Oct 14 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $83.95 plus shipping. This same textbook is used through the Revit 1-2-3 series of classes. It is an excellent resource for helping you prepare for Revit Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Revit Architecture 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Revit Architecture 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$265.00 |
| |
| |
| |
| |
| |
| |
| |
|
REVIT 2 - Intermediate Building
Information Modeling
| Tuesday/Thursday Daytime Classes |
| |
|
|
|
| Apr 27 - May 06 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| Jul 27 - Aug 05 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| Oct 19 - Oct 28 2010 |
Tu/Th |
8:00am-12:00pm |
$ 320.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$265.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Apr 27 - May 06 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| Jul 27 - Aug 05 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| Oct 19 - Oct 28 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 320.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class.
|
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $83.95 plus shipping. This same textbook is used through the Revit 1-2-3 series of classes. It is an excellent resource for helping you prepare for Revit Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Revit Architecture 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Revit Architecture 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$265.00 |
| |
| |
| |
| |
| |
| |
| |
|
Back
to Top
Revit
Architecture (Revit 3) - Construction Documents |
REVIT ARCHITECTURE (Revit 3) - Creating a Set of Construction Documents
| Tuesday/Thursday Daytime Classes |
| |
|
|
|
Our Revit 3 classes are taught in the evening only.
If you office is interested in a customized daytime training class, please call Robyn at 619-758-9300 Extension 6#. |
Textbook
Please read in the Evening Class schedule for specific information. |
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Feb 16 - Mar 04 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 395.00 |
| May 18 - Jun 03 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 395.00 |
| Aug 17 - Sep 02 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 395.00 |
| Nov 02 - Nov 18 2010 |
Tu/Th |
6:00pm-10:00pm |
$ 395.00 |
| |
|
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $83.95 plus shipping. This same textbook is used through the Revit 1-2-3 series of classes. It is an excellent resource for helping you prepare for Revit Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Revit Architecture 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Revit Architecture 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
|
REVIT MEP (Revit 4)
| Tuesday/Thursday Daytime Classes |
| |
|
|
|
Our Revit MEP classes are taught in the evening only.
If you office is interested in a customized daytime training class, please call Robyn at 619-758-9300 Extension 6#. |
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Mar 16 - Apr 01 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 395.00 |
| Jun 15 - Jul 01 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 395.00 |
| Sep 14 - Sep 30 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 395.00 |
| Nov 30 - Dec 16 2010 |
Tu/Th |
5:30pm-9:30pm |
$ 395.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping. This textbook is used for the the Revit MEP (Revit 4) class. It is an excellent resource. There is currently not any Revit MEP Associate or Professional Certification.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk Revit MEP 2010, Volume 1 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
Learning Autodesk Revit MEP 2010, Volume 2 Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Revit Certification Review Class
| Tuesday Evening Classes |
| |
|
|
|
| Mar 09, 2010 |
Tu |
5:30pm-9:30pm |
$ 150.00 |
| Jun 08, 2010 |
Tu |
5:30pm-9:30pm |
$ 150.00 |
| Sep 07, 2010 |
Tu |
5:30pm-9:30pm |
$ 150.00 |
| Nov 23, 2010 |
Tu |
5:30pm-9:30pm |
$ 150.00 |
| |
|
|
|
This class is designed to help you prepare for the Revit Certification Examination. |
SketchUp 1
Introduction
Daytime Classes
| We are currently offering SketchUp 1 only in the evening classes. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Apr 19 - Apr 28 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| Jul 19 - Jul 28 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| Oct 19 - Oct 28 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Economic Stimulus |
Special |
$245.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
SketchUp 2
Intermediate
Daytime Classes
| We are currently offering SketchUp 2 only in the evening classes. |
| Monday/Wednesday Evening Classes |
| |
|
|
|
| Mar 02 - Mar 10 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| May 03 - May 12 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| Aug 02 - Aug 11 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| Nov 01 - Nov 10 2010 |
M/W |
5:30pm-9:30pm |
$ 295.00 |
| |
|
|
|
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Economic Stimulus |
Special |
$245.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Introduction - Visualization
Afternoon Classes
Intro 3ds Max Classes is only taught during the evening.
Evening Classes
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| May 11 - May 27 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| Aug 10 - Aug 26 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| Nov 09 - Nov 30 2010 * |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| |
|
|
|
* No class on Thanksgiving Day, November 26, 2009 or November 25, 2010
Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk 3ds Max Design 2009 for Design Visualization - Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials
|
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
Intermediate - Animation
Afternoon Classes
Intermediate 3ds Max Classes are only taught in the Evenings.
| Tuesday/Thursday Evening Classes |
| |
|
|
|
| Mar 09 - Mar 25 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| Jun 08 - Jun 24 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| Sep 14 - Sep 30 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| Dec 07 - Dec 16 2010 |
Tu/Th |
5:30 - 9:30 pm |
$ 395.00 |
| |
|
|
|
| Our classes are fast-track, accelerated courses. Paying attention in class is imperative. If you have ANY CONCERNS about your computer competency, we STRONGLY RECOMMEND that you improve your computer skills before attending the class. |
Textbook
The textbook is required. It is ordered at the time of registration. The cost of the textbook is $71.95 plus shipping.
The books are from Autodesk. The versions available at Amazon do not satisfy the course requirements. The textbooks are:
Learning Autodesk 3ds Max Design 2009 for Design Visualization - Autodesk Certification Preparation – 001B1-050000-CM10A AOTC Essentials |
Economic Stimulus |
Special |
$325.00 |
| |
| |
| |
| |
| |
| |
| |
These are trying times and we're trying to help you prepare for the Economic Recovery. We have temporarily reduced our prices. |
|
|
State of the Art Classrooms
